A pull-ring style relief valve for your BrewBuilt Fermenter or FermZilla in conjunction with a Spunding Valve. This is not a sole spunding valve unit.

Cornelius Type Pressure Relief Valve (PRV) for Keg Lids or MK4 Regulator - YELLOW 17psi (1.5Bar)

KB02113 FermZilla Plastic Pressure Kit - Suits Conical and All Rounder Model

FermZilla Plastic Pressure Kit - Suits Conical and All Rounder Model

27L FermZilla Conical Pressure Brewing Kit

Rating:
100% of 100

*Free BlowTie Spunding Valve Promotion for our Retail Customers Only*

This particular kit is a one-click option for those who want to be able to brew under pressure with a 27L Conical FermZilla.

This is a very good starting point for those who are just getting into pressurisable fermenters and want to know what we would recommend to use with them.
This kit has carbonation caps on the collection container either to purge or take samples of yeast from.

We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.

Please see the description for dimensions!

Regular Price $208.80 Special Price $167.65
Availability: In stock
SKU
KB03577
or 4 interest-free payments of $41.91
Learn more

FermZilla 27L Conical Pressure Brewing Kit -  27L

This particular kit is a one-click option for those who want to be able to brew under pressure with a 27L Conical FermZilla. Designed as a single batch system that goes perfectly hand in hand with the BrewZilla 35L if you are looking to Brew All Grain to Partial Mash beers.

This is a very good starting point for those who are just getting into pressurisable fermenters but also want to dabble in yeast harvesting and purged dry hopping. If you would prefer a more simplistic pressurisable fermenter in a similar size, we would very much recommend the 30L All Rounder FermZilla Pressure Brewing Kit. This unit does not have the added collection container / butterfly valve assembly at the bottom.


We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.

For more information on what set ups other brewers have or recommend, jump over to our KegLand Home Brew Community Group Facebook Group.

What we have inside this kit is:
1 x 27L Conical FermZilla Base Kit (unassembled)
      1 x 27L Gen 1.1 Tank
      1 x Top Lid Assembly, with Red PRV (35psi) [2 x Male Cap Threads] [Up to 4 drill ports for accessories]
      1 x Premium 3 Piece Airlock
      1 x Butterfly Valve and Cone Assembly with Gasket
      1 x Stainless Stand with swing handles
      1 x Stainless Steel Handle Assembly
      1 x 1000mL Collection Container & Lid* [2 x Male Cap Threads]
      1 x Grommet Bottle Cap (Airlock Port)
      1 x KegLand Adjustable Easy Opening Tool
      1 x Strip Stick On Thermometer
      1 x Spare Seals
2 x Red Carbonation Caps (We use these as Gas posts)
2 x Yellow Carbonation Caps (For Liquid Posts)
1 x Stainless Steel Float with Silicone Dip Tube (You will need to cut this to your desired depth)
1 x Mesh Filter attachment for the dip tube (Very handy if you're doing a lot of dry hopping in the Fermenter)
1 x FREE! 0-15psi Integrated Blow Tie Spunding Valve Complete Kit (Ball Lock DC Grey Gas MFL, duotight FFL x 8mm, rigid 8mm tube and the red Blowtie 0-15 integrated spunding valve assembly) Valued at $45.10

*The above items cannot be removed / altered within this kit*
Collection container lid is not pressure rated*

 



The new and improved FermZilla 27L brought to you by the critical key minds and engineers behind the original Gen1. But with all the tweaks that make it the most cost-effective conical fermenter to date! 

The new FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget.  With the FermZilla you have the many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point and available in FermZilla 27L and FermZilla 55L sizes.

 

New and Improved:
1. Larger Dump Valve
2. Larger opening
3. Pressure rating 2.4bar (35psi)
4. Designed to fit in the new WiFi Fermenter Fridges (coming soon)

 

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

 

Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 27L - PDF Instruction Manual

Dimensions:
To download the sizes for the FermZilla in both the 27L click the link below. Please measure up before purchasing.
FermZilla 27L

Warnings:
Please read the instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.

 

To see the video on this product look below:

 

We have also made this video here to show you how to get the Dump Valve Together.  Some people get a bit confused with the reverse left hand thread so we thought we should make a video explaining this.

 

Are you interested in fitting a glycol heating or cooling coil for temp control then you might want to check out this product.  This coil can fit into the lid of these fermenters and it's a complete kit that includes the duotight bulkhead fittings.  To see the Temp Twister Stainless Coil Click Here.

If you want to fit a thermowell to the lid of this fermenter then you should really check out this 60cm Stainless Thermowel that includes the bulkhead fitting so you can mount this into the lid of this Fermenter.

 

If you want to see another review on the product you can see this one from PubSheds in the UK:

 

Here is another video from a product reviewer called David Heath who has a great channel based in Europe:

 

For some really handy tips and tricks you can see a video from Gash.  He is a total legend:

We sometimes get asked what is the easiest way to clean the dump valve seal on the FermZilla conical unitank and this is definitely the easiest way.  Soak in PBW cleaning solution (for 5 minutes max) then use a high pressure hose to squirt around the seal and this releases any built up hops etc.  See video below.

More Information
Delivery Return

Please ensure that your shipping information is 100% correct before submitting your order.
Once an order has been placed KegLand cannot change/add to an order or change the shipping information.
Any such changes will fall onto the customer to contact the shipping provider and attempt redirection.
For larger items we do recommend that you use a business address as your primary shipping choice. This limits un-deliverable items as it will be delivered within business hours ensuring a recipient can sign for the package.

If you require extra items, a secondary order will have to be placed with additional shipping costs.

Please note that some items are coming from multiple warehouse locations and may not be delivered at the same time.
Full Terms & Conditions.

Instruction Manual

 

Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 27L - PDF Instruction Manual

Dimensions:
To download the sizes for the FermZilla in the 27L click the link below. Please measure up before purchasing.
FermZilla 27L

Warnings:
Please read the instruction manual thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.

Troubleshooting Manual
This manual will assist you with leak detection and solving leaks.

Hydro Test Instruction Manual
Instructions for performing a hydro test on a FermZilla tank that has passed its expiry date can be found below:
Fermzilla Hydro Test - PDF Instruction Manual

Having Trouble Removing The Lid?
We make all the new FermZilla units with a slightly tighter lid o-ring and this makes the lid a little tighter.  The easier way to take off the lid is to undo the lid ring then use a screwdriver or 7 in one tap tool to lever the lid up as shown in the animated GIF below:

lever FermZilla Lid open

Do you need some assistance with the collection container?
We often tell customers not to overtighten the collection container.  With that said we now get some customers also that do not tighten the collection container enough.  So to ensure you have correct tightness you should not see the thread of the collection container.  See the image below:
FermZilla how to correctly tighten collection container

 

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account