Carbotek Nitro Cool - Single Tap - Espresso Martini or Nitro Cold Brew Coffee or Nitro Beer

Unlike other nitro systems this type of bench top nitro unit sucks nitrogen out of the air and infuses this into the beverage meaning you do not need to purchase nitrogen cylinders. The system also chills the beverage too so all you need to do is fill the supplied tank with your nitro cold brew or cocktail mix and dispense directly to tap. It's literally that easy. Alternatively if you want to dispense nitro beers do not use the supplied nitro tank and use a keg instead. Fill your keg with your nitrogen stout or other nitro beer. Then put a very small amount of gas pressure into the keg (1 or 2psi max) then plug the nitrogen out line into the nitro dispenser. No more expensive cylinder rental. Just hook it up and turn it on. The machine cools down in 15min and you will be pouring cold nitro stout with creamy cascading effect. Features: - No need for bulky nitrogen tanks - Slimline design to fit neatly on your bench - Ready to use in a few minutes - Draws from any container of cold brew coffee - Adjustable gas levels - Adjustable temperature control - Low service and maintenance requirements - Easy to use, move, and clean Technical Specifications: - Power Supply: 230V/50Hz, 10A - Stainless Steel unit - Dimensions: 40.5cm (D) x 32.5cm (H) x 17cm (W) plus 14.5cm (D) for the drip tray and 19cm (H) for the handle - Weight: 18.5kg - Flow rate: either 0.6L/min or 1.2L/min (choice of flow rate disc) - Maximum cooling power: 5C (+/- 1C) - Liquid volume in dispenser: 500ml - Power cord: 1.5m length - Hose: 1.5m length - Made in Germany - 12 Months Limited Manufacturer's Warranty