4 Tap Slimline Hanging Kegerator Gas Control Board for 6.35 (1/4') mm OD Hosing

Individually set your keg pressures on your Kegerator accurately with KegLands digital or analog inline regulator kit. No drilling, glues or sticky tapes at all. Just hang it from your guard rail.

This manifold uses 6.35mm OD hosing instead of the standard 8mm OD hose. Why? Because you can fit more lines going into the back of the fridge with less space.
For example if you wanted to run 4 individual set lines, plus a water line and a separate gas line for Nitrogen it is easier to run with thinner hose through the ports at the back.

This particular one click kit comes with:
1 x KL33626 FabLand Four Tap Gas Manifold Bracket (1mm SS)
1 x KL17701 4 Output Gas Board/Display
4 x KL26918 6.35mm duotight - Inline Regulators 
7 x KL18012 Rigid Plastic Joiner 6mm ID x 8mm OD (5/16) x 50mm Long
3 x KL21944 monotight - 6.35mm(1/4inch) Tee Pieces
1 x KL14052 monotight – 6.35mm (¼') Female x 6.35mm (¼') Female Push In Elbow
4 x KL18449 monotight - 6.35mm (¼') Female x 6.35mm (¼') Male Elbows
1 x KL14182 (4 Pack) M5 Bolts 
1 x KL33633 (4 Pack) M5 Nuts (Not sold separately)
1 x KL33763 8 Pack of Screws for Inline Regulator Manifold (Not sold separately)

Option 1 - Digital or Analog
4 x KL18388 Mini Digital Illuminated Gauge 27mm x 27mm x 8mm 0-100psi High 
OR
4 x KL14991 Mini gauge 27mm x 27mm x 8mm Radial Stem - 0-30psi

Option 2 - Hosing? (please select if you do not have)
1 x KL25331 3mm x 6.35mm(1/4) Double Wall EVA (12meter Length in Bag)

Option 3 - Tube Cutter (Recommending for making perfect cuts)
1 x KL07689 Tube Cutter 2 in 1


Please note: The Tap 1,2,3,4 stickers are not included.