30L FermZilla All Rounder Pressure Brewing Kit

FermZilla 30L All Rounder Pressure Brewing Kit

This particular kit is a one-click option for those who want to be able to brew under pressure with a 30L All Rounder FermZilla. Designed as a single batch system that goes perfectly hand in hand with the BrewZilla 35L if you are looking to Brew All Grain to Partial Mash beers.

This brewing kit has been put together by those who want all the benefits of an affordable pressurisable fermentation vessel, but don't want the finnicky extended brew times that one would normally do with a Conical Fermenter. That isn't to say that this is better than the others, It merely is the best All Round solution for one with a busy life schedule but also one who wants to brew the absolute best they can.


We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.

For more information on what set ups other brewers have or recommend, jump over to our KegLand Home Brew Community Group Facebook Group.

What we have inside this kit is:
1 x 30L All Rounder FermZilla Base Kit
      1 x 30L All Rounder Tank
      1 x Top Lid Assembly, with Red PRV (35psi) [2 x Male Cap Threads] [Up to 4 drill ports for accessories]
      1 x Premium 3 Piece Airlock
      1 x Stainless Stand with swing handles
      1 x Stainless Steel Handle Assembly
      1 x Grommet Bottle Cap (Airlock Port)
      1 x Strip Stick On Thermometer
1 x FermZilla Nylon Web Strapping
1 x Red Carbonation Caps (We use these as Gas posts)
1 x Yellow Carbonation Caps (For Liquid Posts)
1 x Stainless Steel Float with Silicone Dip Tube (You will need to cut this to your desired depth)
1 x Mesh Filter attachment for the dip tube (Very handy if you're doing a lot of dry hopping in the Fermenter)
1 x BlowTie Integrated Spunding Valve Kit
   1 x Ball Lock DC Grey Gas MFL
   1 x duotight 8mm x FFL
   1 x 8mm Rigid Joiner Tube
   1 x FREE! 0-15psi Integrated Blow Tie Spunding Valve RRP$39.95!


*The above items cannot be removed / altered within this kit*
Collection container lid is not pressure rated*

The FermZilla AR30 is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing.  It's far more capable than the FermZilla Flat bottom but it's less complicated and less expensive than the FermZilla Conical Unitank.  So like the name says it's the "All Rounder".

If you want to use this product under pressure we would recommend that you use the pressure kit. 

To download the size/dimensions of this tank click here.

Warnings:
Please read the instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But dont panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

If you want a larger model do also have the FermZilla 60L All Rounder too.