Benchy Sparkling - Under Bench Sparkling Water Kit

This Soda Water Kit contains all the neccessary components required for an undercounter system which provides instant chilled and carbonated water on demand. Note - dual outlet water tap not included.
We would recommend purchasing a Billi tap item code number: 852217 from another supplier.

The Benchy Sparkling is the answer for instant chilled and carbonated water water on demand.  Simply connect mains water and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the taps.  Perfect for every household, workplace and for restaurants and cafes where no complicated plumbing is necessary.

2.6kg or 6.0kg CO2 Cylinder Sold Seperately

Benchy Sparkling Under Bench Soda Water Kit

This Soda Water Kit contains all the necessary components required for an undercounter system which provides instant chilled and carbonated water on demand. You will just need to add your preferred CO2 cylinder to this kit, 2.6kg or 6.0kg CO2 Cylinder Sold Seperately.

The Benchy Sparkling is the answer for instant chilled and carbonated water water on demand.  Simply connect mains water and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the taps. 

Our Benchy range is far superior to other units on the market in terms of cost, ease of use and flexibility. Using the regulator, you are able to adjust and really dial in carbonation levels to your specific taste preferences which you are unable to do on other similar systems on the market. This unit is also significantly cheaper and easier to setup. 

Literally, all you do is*:

1. Plug into the wall
2. Fill internal water tank
3. Connect mains water
4. Connect CO2 Cylinder
5. Pour chilled sparking water. 

It's that simple and you can be enjoying chilled sparking water in under 1hr with this setup and barely any time at all to cool down.

*Ensure that the unit is installed and operated according to the instruction manual which can be found under the more information tab.

Fully Adjustable - The Benchy Sparkling has integrated digital temp controller so you can control the temperature from 0.5C and up to 10C.  You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water.

Cooling Performance - The Benchy Sparkling is able to chill about 20-30L of sparkling water per hour (based on ambient water and air temperature of 20C).  To further increase the capacity of this unit you can pre-chill the mains water supply either by a holding tank (Keg) in the fridge or a G40 Chiller.  If you pre-chill the mains water supply you can more than double the output of the Benchy Sparkling.

Specifications:

Height: 465mm
Width: 290mm
Depth: 520mm (Excluding sight glass that can be removed)
Power Consumption: 
Refrigerant: r600a - (80grams)
Cooling Power: 600watts
Power Consumption: 155w (idle power consumption less than 5 watts)
Capacity: about 25L per hour (based on 20C ambient temperature)
Input Gas: CO2 @ 2-3.5bar(8mm (5/16) OD Tube)
Input Water: Must be 1 bar (15psi) higher than gas pressure (6.35mm (1/4") OD Tube)
Sparkling/Chilled Water Out: 8mm (5/16") OD Tube

See how easy it is to install this unit yourself in the video below:

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy