DIY Budget Soda Water Kit

This kit is designed for those who don't have a Sodastream machine taking up precious bench space. But do want the convenience of taking bottled sodawater away with them.

This particular kit does not come with bottles, this is something that you should purchase from your local supermarket that suit your fridge. We find the Coles branded Sodawater bottles to be the best value and have very strong threads for our Carbonation Cap to attach to. These bottles roughly cost $0.75 cents each (depending on your Coles).

If you are wanting more than 1.25L at any one time, I would suggest purchasing extra Red Carbonation Caps here. These caps are also extremely useful if you open a bottle of soft drink and don't finish it. Don't you hate it when it goes flat in the fridge next time you go to take a drink. Now you can whack one of these Carbonation Caps on and pump it up before you put it back into the fridge, it will maintain full carbonation!

This kit is designed for those who don't have a Sodastream machine taking up precious bench space. But do want the convenience of taking bottled sodawater away with them.

This particular kit does not come with bottles, this is something that you should purchase from your local supermarket that suit your fridge. We find the Coles branded Sodawater bottles to be the best value and have very strong threads for our Carbonation Cap to attach to. These bottles roughly cost $0.75 cents each (depending on your Coles).

If you are wanting more than 1.25L at any one time, I would suggest purchasing extra Red Carbonation Caps here. These caps are also extremely useful if you open a bottle of soft drink and don't finish it. Don't you hate it when it goes flat in the fridge next time you go to take a drink. Now you can whack one of these Carbonation Caps on and pump it up before you put it back into the fridge, it will maintain full carbonation!

Installation:
Install the Regulator to the 2.6kg CO2 Bottle with a length of hose that suits your needs. We'd suggest around 2m or so. Ensure you cut straight and cleanly. No burs or cuts.
Attach the grey push in connector to the Regulator. Then attach the length of hose to it, ensuring you have pushed it as far as it can go in.
Then attach the opposing end into the Red/Grey Disconnect, again push it all the way on.
What what we are going to do now is a pressure check to ensure you don't lose an entire bottle of gas.
Turn on the 2.6kg Cylinder from the black handle ontop of it. The left hand side gauge of the regulator should shoot up (don't worry about the value) Next we will increase the pressure on the regulator up to 30psi then turn off the 2.6kg Cylinder pressure. Come back in an hour or so, if the regulator is reading zero. Then you'll have a leak somewhere in the system. Ensure everything is just a little bit more tight than hand tight. Check the hosing with soapy water if you're still experiencing leaks.

Fizzy Water time!
Step 1
Fill up your desired bottles with cold water from the tap or filtered water and screw in the Red Carbonation Cap. I'd leave a little bit of headspace, maybe three or fingers from the top. The more headroom you give it, the fast it will carbonate (fizz up) (these should be soda water bottles, not just normal still water bottles as these are not pressure rated).

Step 2
Chill down the bottle in the fridge, this usually takes about 5 to 6 hours. But its easier to put them in the fridge overnight

Step 3
Turn on your 2.6kg Cylinder from the top valve. Dial-up your regulator to about 30psi.

Step 4.
Pull the lip on the Red/Grey Disconnect back and connect up the disconnect to the Red Carbonation Cap.

Step 5
Shake it like a polaroid picture in 30 second intervals. Gently open up the bottle and taste test. If it needs more fizz, repeat this step. (It's easy to get CO2 into a liquid, its much harder to get it out. That is why we suggest to do it in stages to find the right threshold you prefer)

This kit includes:

1 x KL01489 2.6kg CO2 Gas Cylinder (FULL)
1 x KL07429 Type 30 - MK4 Regulator (6.5bar PRV & 100psi Gauge)
1 x KL06231 EVABarrier 5mm x 8mm Double Wall EVA (12meter Length in Bag)
1 x KL20756 duotight 8mm (5/16) x Ball Lock Disconnect - (Grey + Red Gas)
1 x KL10788 RED FermZilla - Liquid/Gas Post Plastic Carbonation Cap

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy