Brass Dual-Threaded Insert for Wooden Tap Handles

Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.
All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw in with a large flat screw driver.

Suits NukaTap and Intertap taps

DIY Beer Tap Handle Inserts - Dual Threaded - 3/8″-16 threads, .625″ Length

Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! KegLand now has the answer with these simplistic brass inserts.
All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw in with a large flat screw driver.

It is important not to push down too hard if you're going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.

Suits NukaTap and Intertap taps

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy