KL03032 Nylon Flare Washer Olive for MFL Fittings - ball lock or pin lock disconnects 1/4 SAE

Nylon Flare Washer Olive for MFL Fittings - ball lock or pin lock disconnects 1/4 SAE

Straight Barbtail/ barbtail/ coupler/ tap/ 007391/ KL05098/ works with Keg couplers/ tap shanks/ beer plumbing/ home brew hardware/ kegland/ melbourne/ australia. home brew/ beer/ beverage plumbing

8mm (3/8" Inch) Straight Barbtail Stainless Steel (to be used with 5/8 hex nut)

duotight 8mm(5/16) Push In to 5/8" to suit Keg Couplers and Tap Shanks

Rating:
60% of 100

Looking for high quaility push in fittings that will seal tight?  duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Why do we use Double O-rings?
The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them.  The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings.  This makes our fittings even more reliable and reduces the chance of a leak significantly.

The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues.  This typically can be an issue with other fittings.  This combination of factors makes duotight fittings the most reliable push fit fittings on the market.

Compatible with our 
- EVABarrier 4mm ID x 8mm OD line
- EVABarrier 5mm ID x 8mm OD line
Not compatible with 6mm ID x 10mm OD line

No clamps necessary! 
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

$3.95
Availability: In stock
SKU
KL06903
or 4 interest-free payments of $0.99
Learn more
  • Buy 10 for $1.95 each and save 51%

duotight 8mm Push in to 5/8" BSP (suits shanks, 50L keg couplers)

This straight joiner is suitable for our EVABarrier Beer & Gas hosing in 4mm ID & 5mm ID line or most lines with  8mm outer diameter. 

The thread on this fitting will suit:
Standard Keg Couplers with 5/8 thread
Standard tap shanks with 5/8 thread
Many other home brew fittings with 5/8 Thread

It will not fit the 10mm OD EVABarrier line (with 6mm ID) but we do sell these larger 10mm duotight fittings separately.

No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi

These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push ins on the market have EPDM o-rings, let alone two! per push in connection.


What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages.

EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds.   When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications.

More Information
Delivery Return

Please ensure that your shipping information is 100% correct before submitting your order.
Once an order has been placed KegLand cannot change/add to an order or change the shipping information.
Any such changes will fall onto the customer to contact the shipping provider and attempt redirection.
For larger items we do recommend that you use a business address as your primary shipping choice. This limits un-deliverable items as it will be delivered within business hours ensuring a recipient can sign for the package.

If you require extra items

Write Your Own Review
You're reviewing:duotight 8mm(5/16) Push In to 5/8" to suit Keg Couplers and Tap Shanks
Your Rating