duotight - 9.5mm(3/8) x FFL (to fit MFL Disconnects)
This straight MFL joiner is suitable for our EVABarrier Beer & Gas hosing in 6mm ID x 9.5mm OD line or most lines with 9.5mm outer diameter.
The FFL x 9.5mm duotight is suited to those who prefer to have their gas line a different thickness so that it can be easily identified in a tangled like situation inside a fridge/keezer/kegerator.
Looking for high quaility push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.
Why do we use Double O-rings?
The secret to our superior sealing performance is not just the fact that we use high quality EPDM o-rings but also use two of them. The double o-ring means we literally have twice the sealing surface surface when compared with other push in fittings. This makes our fittings even more reliable and reduces the chance of a leak significantly.
The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.
Compatible with our
- EVABarrier 6mm ID x 9.5mm OD
Not compatible with 4mm ID x 8mm OD line
Not compatible with 5mm ID x 8mm OD line
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.
- Buy 10 for $1.95 each and save 51%
duotight - 9.5mm(3/8) x FFL (to fit MFL Disconnects) - 7/16" - 20UNF, 1/4 SAE)
The thread on this fitting will suit:
MFL Ball Lock and Pin Lock Disconnects
Our MKIII and MK4 Regulators
Many other home brew fittings with MFL Thread
It will not fit the 4mm ID x 8mm OD or mm ID x 8mm OD EVABarrier line. This item is strictly for use with 9.5mm(3/8) Outer Diameter EVABarrier Hose.
No clamps necessary!
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market, duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. No other push ins on the market have EPDM o-rings, let alone two! per push in connection.
What is EPDM?
EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages.
EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds. When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications.
Need further instructions?
We have made an instruction sheet to make it really easy for you to determine the sufficient "tightness" when attaching this fitting to a ball lock disconnect or regulator. For informatoin regarding this please have a look at this PDF here.
Please ensure that your shipping information is 100% correct before submitting your order.