6m Roll of Heavy Duty Silicone Tube - (12.5mm ID x 18.5mm OD)
KL06873
Ideally suited to setting up a brewery. This 1/2inch hose size is commonly used for breweries up to 200L in size. Compatible with BrewZilla Breweries and various other fittings such as camlock fittings and 1/2 inch nipples/barbs.
Key Features:
- Heavy Duty
- High Temperature Resistance over 200°C
- Food Grade
- Kink Resistance
Clamps suitable for this hose being attached to a 13mm barb are the:
KL06736 - Bag of 20 x 20.5mm S.S. Stepless Clamps(suit 17-20mm OD)
This silicone hose is resistant to constant high temperatures (over 200°C) and has good chemical resistance.
The soft silicone is easy to work with and seals very well.
The soft silicone is great for transferring beer from fermenter to keg and will fit onto the standard fermenter tap or standard 13mm hose barbs.
It is also recommended for handling spirits and for distillation applications as it does not leach plasticisers like vinyl tubing.
Internal diameter is 12.5mm and outside diameter of 18.5mm.
Note: This hose should not be used for higher pressures above 20psi (such as mains water pressure). The hose has a burst pressure of approximately 35psi.
Overall rating: 4.9444447 / 5 from 54 reviews.
This heavy-duty silicone tube is highly regarded for its durability and high-temperature resistance, making it ideal for brewery setups and transferring beer. Its food-grade material and kink resistance ensure reliable performance. However, it is not suitable for pressures above 20psi.
Review topics: [quality, leaks, fit, hose, value, tube, transfer, service].
"It was time to replace my hoses. The last lot lasted around a year, they were starting to smell a bit after a break from brewing so time for fresh hoses. For this price knowing they won't be adding any nasty flavours is peace of mind"
"I use this with the Red Reaper. Connects nicely with camlock fittings and 20. 5mm stepless clamps. Full details of the best config is on their website. Very helpful, thanks Kegland"
"This hd tubing is compatible with all Kegland 12. 5mm wort line connections, and made connecting a Red Reaper cf chiller to my Digiboil kettle and wort pump with butterfly clamps a breeze. The 3mm sidewall thickness makes it kink resistant, and the only slight downside is that the outside is a bit sticky, and picks up dirt easily (I imagine this will fade with time). It is the right stuff!"
"Used this to hook up the boiler to the pump and counterflow chiller. Worked a treat. Recommend cleaning and sanitising after use and use an air compressor and blow gun to blow and liquid out to prevent stagnation and mould"
"I keep lots of lengths handy"
"Worked perfectly"
"Always very handy to have around."
"Great product. Extremely well priced. Highly recommended for any home brewer 👍👍"
"Great hose"
"great quality and will do the job perfectly"
