Insulating Neoprene Kegerator Tower Tube 115mm/4.5' (4 Tap)

This unit has been designed to fit our standard:

Quadruple Tap Brushed Stainless Font Tower

Or any other 115mm Diameter font.

Keep your beer icy-=cold with this insulative tower/font cover right out of the first drop.  Most kegerators that we sell include a font fan that blows cold fridge air up the font.  With that said heat loss from the stainless font surface causes the font temperature to rise meaning that a small amount of beer contributes to the "first pour foam effect".

These EXTRA THICK neoprene covers are made from 7mm thick meaning your beer will stay cold even if the hot Australian sun is beating down directly on the font.

This saves power as it reduces electrical ingress meaning your fridge is not working as hard and you pay less in power.  So this thing practically pays for itself.

HOW TO INSTALL

1. Remove taps from the font.  (no need to remove the shank from the font just the taps).

2. Pull the insulated cooler down over the font

3. Mark the tap holes and use a sharp pair of scissors to cut a hole in the neoprene jacket. 

4. Re-attach the taps
NOTE: Nail cutting scissors are particularly good for this application. Or if you have a 5/8" Hole Punch that can also work.


Please note these only come with a KegLand Logo. They are not sold in plain black.

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy