6 Way gas manifolds/ 100psi/ 2 gas line outputs/ 1/4inch ball vales/ ball valves/ manifold/ aluminium/ brass/ stainless/ built in/ check valve/ regulator/ protect/ gas/ co2/

6 Output / 6 Way Manifold Gas Line Splitter with Check Valves (1/4" thread, 6mm Barb)

Inert Gas Regulator for Disposable Cylinder (N2/ Ar/ CO2 Compatible with M10 Thread)

Inert Gas Regulator for Disposable Cylinder (N2 - Nitrogen, Ar - Argon, CO2 Compatible with M10 Thread)

High Capacity Disposable Nitrogen (N2) Gas Cylinder - 1.43L - 110Bar (for Nitro Stout or Coffee)

80% of 100

These nitrogen cylinders are perfect for Nitro Stout of Nitro Coffee.  If you want to get a really nice creamy head on your stout or nitro coffee these disposable cylinders are the way to go.

This cylinder will dispence a little over 40 liters of stout or nitro coffee.

Stout and nitro coffee requires high pressures (such as 2-3bar) so the product can push through the perforated disk that is inside our nitro spouts like this.  These elevated pressures require nitrogen because if CO2 was used at this high pressure the CO2 would absorb into solution and overcarbonate your beverage (if it's stored cold).  As a result nitrogen is necessary.

Nitrogen doesnt dissove into solution like CO2.  Even at elevated pressures only small amount of nitrogen will dissolve into solution.  It doesn't form the weak hydrogen bond with the liquid like CO2 and for that reason it does not dissolve into water based beverages easily like CO2.

Availability: In stock
or 4 interest-free payments of $9.99
Learn more
  • Buy 4 for $29.95 each and save 25%

High Capacity Disposable Nitrogen (N2) Gas Cylinder - 1.43L - 110Bar
High Capacity: 157L
(at standard temperature and pressure)
86 grams
Nitrogen (N2)

Cylinder Type: 3 Piece Welded Cro-Molly Alloy
Cylinder Volume: 1.43L
Working Pressure: 110bar (1595.42psi)
Test Pressure: 180bar (2610.68psi)

Directions for use
This bottle is compatible with our KegLand M10 Inert Gas Regulator.  It's also compatible with many other regulators already on the market.
1. Remove the protection cap from the valve.
2. Connect the regulator to the cylinder valve. There may be some gas escaping as you're screwing on so screw the gas cylnider into the regulator quickly to limit this loss, continue to screw on until gas stops.
3. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder.
PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detach from the fitting.

To avoid the chance of leaks and returning to an empty bottle, please triple check every connection point on your system or disconnect your gas cylinder between uses.

Please note this item cannot be sent with Australia Post. If you purchase this item and select Australia Post, it will automatically be changed to a suitable shipping carrier. We will contact you if further information is needed.

More Information
Delivery Return

Please ensure that your shipping information is 100% correct before submitting your order.
Once an order has been placed KegLand cannot change/add to an order or change the shipping information.
Any such changes will fall onto the customer to contact the shipping provider and attempt redirection.
For larger items we do recommend that you use a business address as your primary shipping choice. This limits un-deliverable items as it will be delivered within business hours ensuring a recipient can sign for the package.

If you require extra items

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account