Sodastream Cylinder Adapter

Sodastream Cylinder Adapter

72 inch Sodastream Cylinder Adaptor Hose - Cheaper CO2 gas for your Sodastream Machine

FreedomOne Sodastream Adapter Hose MKII - 72inch

FreedomOne Sodastream Adapter Hose MKII - 36inch

Rating:
90% of 100

Want to ditch the excessive cost of Soda Stream bottles and the waste associated with it? Purchase our Freedom One Hose adaptor in 32inch or 72iinch along with our 2.6kg or 6kg Gas bottle for maximum cost savings!

Please Note: This does not come with a CO2 Bottle, Or the SodaStream unit itself.

$50.00
Availability: In stock
SKU
KL04190
or 4 interest-free payments of $12.50
Learn more

FreedomOne Sodastream Adapter Hose MKII - 36inch


Want to ditch the excessive cost of Soda Stream bottles and the waste associated with it? Purchase our Freedom One Hose adaptor in 32inch(90cm) or 72inch(1.8meters)  along with our 2.6kg or 6kg Gas bottle for maximum cost savings!
Our 2.6kg Gas bottles can carbonate up to 390L. With a refill (if you ever run out) costing about $25-35

Or with our 6.0kg cylinder you'll be able to carbonate up to 900L  - Refills around $50-60.

A typical Soda Stream cylinder can only carbonate up to 60L and will cost about $20 per fill.  So given these figures the larger cylinder and this hose will pay itself off once you fill the 2.6kg gas cylinder once.  It's a no brainer!


Our new Freedom One Sodastream Adapter MKII - Does not have a quick disconnect feature. This has been removed to reduce the liklihood of the quick disconnects two washer seal design dislodging and blocking the hose rendering it unusable. 
We have included two options when drilling through your bench top to fit your hose. Either remove the stainless thread from the brass connection and drill a 14-15mm hole. You will need to use Lock-Tite glue or plumbers tape to get a good seal on this connection after you re-fit it.
Without removing the brass connection piece you would need to drill a 30mm hole to fit the bottle connection end through your bench top.

Please Note: This does not come with a CO2 Bottle, Or the SodaStream unit itself.

More Information
Delivery Return

Please ensure that your shipping information is 100% correct before submitting your order.
Once an order has been placed, KegLand cannot change/add to an order or change the shipping information.
Any such changes will fall onto the customer to contact the shipping provider and attempt redirection.
For larger items we do recommend that you use a business address as your primary shipping choice. This limits un-deliverable items as it will be delivered within business hours ensuring a recipient can sign for the package.

If you require extra items after you have placed your order

Instruction Manual

Troubleshooting tips:

If you find that you are getting a low amount of carbonation or the gas is not flowing as vigerously into your sodastream machine then please try these troubleshooting tips:

1. Check you have gas in your gas cylinder.  (Do not use the pressure gauge for this as the pressure increases and decreases as the temperture of the bottle increases and decreases).  So the only way to check the cylinder is to put it onto the bathroom or kitchen scales.  The weights are

2.6kg Cylinder - Full will be about 10kg.
2.6kg Cylinder - Empty will be about 7.5kg

6kg Cylinder - Full will be about 21kg
6kg Cylinder - Empty will be about 15kg

2. Check you get good flow from the cylinder valve.  Without any FreedomeOne hose attached turn on the black cylinder handle for a short period and make sure the gas flows out of the valve vigerously.  If it doesnt then you might want to adjust your RPV vave (INSTRUCTION SHEET HERE)

3. Check you have gas flowing through the hose.  Attach the hose to the CO2 gas cylinder then use some pliers or something hard to depress the pin on the sodastream end like show in THIS VIDEO HERE.   If you do not get good flow through the hose your hose might be blocked.  Perhaps one of the o-rings in the quick disonnect has been pushed into the hose.  If this happens you need to unscrew the fittings on the hose and clear out any blockages or back flush the device with pressure from the opposite direction.

4. Make sure the hose is screwed into the back of the Sodastream machien fully.  If the FreedomOne hose is not screwed in far enough the pin will not get depressed completely.  If the pin is pressed down too much it may never disengage and CO2 might continue to flow even after the Sodatream machine is in the off position.  Check your seals inside the Sodastream machine to make sure they are in good condition.

Write Your Own Review
You're reviewing:FreedomOne Sodastream Adapter Hose MKII - 36inch
Your Rating