Great little Pump
"Great little unit, fits perfectly with my Digiboil 30L. Smooth operation, almost silent running. Just needs to be able to slow down."
1/2 Inch Threaded 25 Watt High Temperature Magnetic Drive Pump (220-240v)
$52.00
Skip to product information
In stock
1/2 Inch Threaded 25 Watt High Temperature Magnetic Drive Pump (220-240v)
KL03841
$52.00
This magnetic drive pump is the ideal pump for your brewing system needs. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.
A 1/2" ball valve is recommended on the outlet side to reduce the flow if you're using this for brewing purposes and don't want it to go full ball. Putting pressure from restrictive flow will not hurt a magnetically driven pump, it is precisely what this baby is used for.
It is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!
If you want to upgrade this pump to stainless steel head you can purchase this product KL03865 Stainless Steel 25w Pump Head. Or if you want to upgrade to the full Tri-Clover (TC) Breakdown Pump Head with purge/PRV valve then click here
This magnetic drive pump is the ideal pump for your brewing system needs. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.
Specifications:
Voltage: 220-240 at 50-60hz
Max Head: 3.4m
Max Flow: 19L/min
Wiring: Pre wired with Australian standard 10amp power cord
Fittings: 1/2 BSPSpecifications:
NOTE: Like almost all centrifugal pumps, do not run this pump dry.
You may also like
Overall rating: 4.4594593 / 5 from 37 reviews.
AI Generated Review Summary
This magnetic drive pump is highly efficient and suitable for brewing systems, capable of handling temperatures up to 120C without cooling. It operates quietly and generates a whirlpool after the boil. A 1/2" ball valve is recommended for flow control. Note that it is not self-priming or submersible.
Summary topics
- Pump Fit (10%): Customers expressed appreciation for the great little unit that fits perfectly with my Digiboil 30L.
- Pump Quality (44%): A substantial number of customers raved about the pump, praising its quality, quiet operation, and ability to generate a whirlpool after the boil.
Review topics: ["quality","fit","value","works","price","pump","unit","flow","tank","transfer","operation"].
Review highlights
- "Great pump I added the stainless head and 1/2 ball valve on the outlet wish I had bought it sooner" —
- "Pumps liquid and no leaks" —
- "Good little pump, does its job." —
Reviews
Last one failed half way through brew day
"I use two of these for my three vessel system. They are well priced. Unfortunately the one I was replacing failed half way through brew day without warning. I guess I'll have to have a spare one on hand to avoid that occurring again in the future. I did get 2-3 years out of it before it failed"
Great range and prices, awesome
"The range of products is great, good to see lots of compatible fittings, adaptors and hoses so that I didn't have to order from Amazon or from 5 different homebrew shops. Great prices, thanks"
Waste of Money - Rubbish
"Purchased 2 of these pumps, both have failed within a week or so, warranty is a hassle, Apparently pumps must be installed in a correct position to have warranty, yet no instructions say this. Was happy to work through the warranty process but seems like just going around in circles, send a pump back, get sent another “tested”, faulty one Dont bother Dont waste your money."
Good little bit of kit
"Good little bit of kit for the price. Does well recirculating mash. Quality service here as well."
Magnetic pump
"This is the fourth pump of this type I've bought and they work great, but I've had issues with 2 of them thats made them unusable,at the point where the power cable enters the main body over time the sheathing to the cable Frey's leaving a potentially dangerous hazard rendering the pump unusable. needs a fix. lo"
Spare pump
"Use as a seawater pump for aircon cooling on a yacht. Perfect with the ss pump housing. This pump is a spare, just incase"
I've used this once, and
"I've used this once, and it did everything expected of it. Initially, it was to direct wort chilled via a Red Reaper back into the kettle, then, when the temperature was right for pitching, directly into my fermenting vessel."
Good quality pump
"Works great"
Ray
"Great Service and delivered on time, brilliant :)"
Q&A
- Hi, is it ok to use nitric acid (up to 0.5%) around 50 degC while cleaning the pipes and the pump or is there any recommendations for CIP type operations for this pump? Thanks.
- We run StellarSan (phosphoric acid) at a pH of 2 with no issues. These pumps aren't really designed for CIP though - great flow but not much pressure