monotight – 6.35mm (¼") Female x 6.35mm (¼") Female Push In Joiner
This quality made fittings are made from POM / Acetal engineering plastic which had high chemical and heat resistance.
It's also able to hold relatively high pressures in excess of 150psi.
These fittings are common and compatible with many home water filters, reverse ozmosis systmes, water filters, fridges with water dispensing etc.
- Buy 10 for $1.95 each and save 51%
monotight 6.35mm (1/4") Push In Elbow
We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete leakproof seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to pressures over 150 psi
If you want to purchase a tube cutter so you can get a nice clean cut then click here - Tube Cutter.
These push in fittings have been engineered for maximised performance in both gas and liquid applications. Compared to other push in fittings on the market these monotight fittings use quality EPDM o-rings and the plastic body is made out of then engineering plastic POM (Acetal).
If you are looking for tubing for this fitting then you can use this polyethelene tubing (PE) KL11143. This tubing is strong, can take high pressures and is compatible with a lot of water treatment equpiment, water filters, reverse ozmosis fittings, fridges with water dispensers etc. It's food safe so you can using this tubing with beer but it doesnt have the oxygen and co2 barrier properties that EVABarrier has so we would prefer for oxygen sensitive beverages that you use EVABarrier tuning instead.
Please ensure that your shipping information is 100% correct before submitting your order.