Replacement 6 Watt Magnetic Drive Pump for BrewZilla Gen 4

The input and output of the pump are 14mm OD so this will allow you to hook up silicone hose (port KL06873) directly to the pump and secure with hose clamp.

This pump is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!

This pump also comes un-wired.  So it's ready to install into your own brewery or replace the BrewZilla Gen 4 35L or 65L.

If you have  Generation 3 RoboBrew or Generation 3.1 to 3.1.1 BrewZilla please select the replacement pump below.
KL03834 - Replacement 6 Watt Magnetic Drive Pump for BrewZilla Gen 3

Specifications:
Voltage: 220-240 at 50-60hz
Specifications: Max Head: 2.1m(at 240v)
Specifications: Max Flow: 12L/min )at 240v)
Input and Output size: 14mm OD (to suit hose with ID 11-13mm)

We recommend to not run the pump dry for too long as it may impede future performance.

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy