This 3 Stage Wall Mount Reverse Osmosis System is perfect for making non potable water such as bore water safe for human consumption.

Wall Mounted Reverse Osmosis Complete System GT1-39

$249.95
Skip to product information
This 3 Stage Wall Mount Reverse Osmosis System is perfect for making non potable water such as bore water safe for human consumption.

Wall Mounted Reverse Osmosis Complete System GT1-39

KL15141

$249.95
Out of stock

This Wall Mounted RO system has been superseded by KL50784 - 3 Stage Reverse Osmosis Water Filter System for Brewing (GT1-70B), which has been specifically designed for brewers.

This 3 Stage Wall Mount Reverse Osmosis System is perfect for making non potable water such as bore water safe for human consumption. It is also ideal for anyone who is looking to take their brewing to the next level allowing a neutral base water profile to be used in recipes allowing you to absolutely nail the water profile on your next brew to match your desired style of beer perfectly.

The pdf below shows the testing results from running mains water through the Reverse Osmosis Water Filter for Keglands Reverse Osmosis Water.

KegLand Reverse Osmosis Water Testing Results

Production rate 50 GPD under the following conditions:
• 100psi
• Water temperature 21 °C
• 2500 PPM TDS (No iron or manganese permitted in feed water - test first)
• Nominal rejection rate over 96%
• TFC Membrane.
•Technical data:
• Maximum temperature 40°C.
• Maximum pressure 700kpa.
• System only to be used on biologically safe water supply.
• Filter cartridges should be changed every 12 months under domestic conditions or every 6 months for commercial purposes.

REVERSE OSMOSIS 3 STAGE WALL MOUNT SYSTEM

removes FLUORIDE

A True Water Purifier System Complete Kit (DIY)
50 Gallon per Day Flow Rate
190L/Day

Includes:
Inlet Adaptor 3/4"
Opening Spanner
Tubing
Thread Tape
Instructions

Dimensions:
380mm High x 330mm Wide x 130mm Deep

REPLACEMENT FILTERS & TIMES

Stage 1: Carbon Filter 5 Micron Lasts 6 Months. Buy Here
Stage 2: 50 GPD CSM R/O Membrane. Lasts 4-5 Years. Buy Here
Stage 3: Carbon Filter 5 Micron. Lasts 12 Months. Buy Here

Wall Mount Reverse Osmosis Complete System is designed as a portable RO System to remove mineral content from water. Ideally used on bore water or any other water deemed to be not suitable for human consumption. After running water through the RO System it will be suitable for human consumption. Designed to be mounted on the wall in the laundary above laundary tub, so that it can fit onto a 3/4" tap and the waste water can go directly down the drain. The treated drinkable water will flow to a storage tank (not included). Comes with a 3/4" main entry adaptor. 

Flow rate is approximately 50 Gallons Per Day, which will produces approx 215 ltrs per day on reasonably good quality water. The higher the mineral content, the less water will be produced and the more waste water will be produced. All filters and membranes are supplied. Kit includes Tubing, Pre Carbon & Post Carbon Block filters. It is recommended to fill your container whilst it is in your laundary tub, as on this portable RO system there is no automatic shut off. So to avoid any accidental overfills, fill whilst near sink or drainage.

RO water purifications systems will reduce and eliminate TDS (total dissolved solids) like salts and minerals from our drinking water. However contrary to common beliefs, less than 1% of the organic minerals are actually found in most raw water supplies. With the increase of pollutants, our water supply contains mostly inorganic minerals. Inorganic minerals consist of calcium, iron, magnesium, carbonate and lime compounds, which this system will remove. 

Inorganic Organic Rejection
Aluminium 98% Adrazin Over 98%
Arsenic 98% Aldrin Over 98%
Benzene Over 98%
Barium 95% Chlorine Over 98%
Cadmium 95% Chloroform Over 98%
Calcium 98% DOT Over 98%
Chloride 95% Dichlormethane Over 98%
Chromium VI 98% Endrin Over 98%
Copper 98% Fluoranthene Over 98%
Fluoride 99.9% Herbicides Over 98%
Iron 98% Lindane Over 98%
Lead 98% Methoxychlor Over 98%
Magnesium 98% PCB Over 98%
Manganese 98% Pesticides Over 98%
Mercury II 85% Perchlorethylene Over 98%
Nitrate 90% Phenole Over 98%
Potassium 95% Tannic Acids Over 98%
Selenium IV 95% Toxaphene Over 98%
Silver 98% Trichlorethlene Over 98%
Sodium 95% Trihalomethanes Over 98%
Strontium 98% V.O.C.'s Over 98%
Sulphate 98%
Total Dissolved Solids 95%
Zinc 98%

You may also like

Overall rating: 4.75 / 5 from 12 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Great product

"Speedy delivery, work as well, cheers"

Bevan G. (5/5)

Best RO filter for the price

"It's a great filter for the price. It's a little slow, but if you want faster water you need to pay up. Make sure you follow the instructions, and especially the ones telling you to remove the plastic on the pre-installed carbon filters. The initial flush process can take 1-2 hours, so keep that in mind for first time use. The adapter that splits the filter input from your washing machine water hose is prone to leaking. I was able to fix it with thread tape, and a lot of patience. The input and clean output hoses are a little short, but you can grab a longer from from Bunnings no worries. Expect 2-3 hours to gather your brew water."

Espen D. (4/5)

Excellent

"Excellent"

Mark R. (5/5)

Hi, I was pretty exited

"Hi, I was pretty exited about my purchase of the room System as it would give my the opportunity to really improve my beers. Having got it set up I've run the unit over two sessions and I can get the TDS reading below 20ppm and that's after running it for a couple of hours atleast. A home brewer friend who lives in my street has the same unit and uses it often. His reading is 7ppm which is plenty good enough. On my day off tomorrow I will have another go as I need to get this sorted quickly to brew another batch. I just can't see how I've missed anything. Certainly a printed sheet in the box with basic directions and a few tips would have been nice."

Vincent N. (5/5)

does the job

"The flow is slow but what do you expect from a small unit? Seems to do the job of taking practically everything out of your water and do recommend for brewing."

Luke B. (5/5)

Great service. Will take back

"Great service. Will take back to NZ. Look forward to connecting up in the next few months."

David G. (5/5)

RO Review

"Quick and easy to install and the seems to be working great,"

Paul R. (5/5)

This is a great piece

"This is a great piece of kit"

Tony A. (5/5)

Product is good but..

"No instructions either online or in the box. Doesn't exist on manufacturers website . No tool to undo RO filter to remove wrapping. I've tried to submit reviews multiple times and it won't let me. This is my last attempt."

Pete (4/5)

Solid unit. Easy to automate

"Not taking the wrapping off the filters is a rookie mistake...but is the RO membrane wrapped as well??.. I couldn't get it out so can't tell... rookie mistake?.."

Michael (5/5)

Q&A