TC Breakdown - Stainless Steel Pump - 25w Magnetic Drive Pump - Inline - 1/2 Inch BSP
The TC Breakdown brewing pump is a tri-clover stainless steel pump type that eliminates cavitation, is easy to clean and designed specifically for the brewing industry.
Voltage: 220-240 at 50-60hz
Max Head: 3.4m
Max Flow: 19L/min
Wiring: Pre wired with Australian standard 10amp power cord
Fittings: 1/2 BSPSpecifications:
NOTE: Like almost all centrifugal pumps, do not run this pump dry.
This TC Breakdown pump has been designed specifically for the brewing and food industry when keeping your products sanitary is a must.
The Tri-Clover(TC) head can be removed easily and quickly using a 3inch tri-clover clamp meaning no tools are necessary and you can whip the head of in a flash to clear out spent grain, hop material or even a blockage.
The inline design means the input and output are inline making it easier to integrate into your brewery setup and this it's easy to keep your hoses neat and tidy.
Purge/PRV - Eliminate Cavitation
Unlike some other pumps such as the Blichmann Engineering RipTide pump our pump head uses Cornelius compatible PRV so if you are already in the brewing industry you will have compatible spare parts in your tool kit. The PRV acts as a safety so you do not over pressurize your pump head or brewery system. It can also be used to purge out air practically eliminating cavitation issues.
The entire pump head is made from 304 Grade Stainless steel so it's highly resistant to chemicals, heat and physical abuse.
As the pump head attaches to the body using tri-clover clamp the pump head can be rotated at any angle giving you infinite adjustment on the angle at which the hoses connect to the pump. This also makes it easy to configure the plumbing to your unique brewery design.
Note: If you already have a KegLand 25w magnetic drive pump you can purchase the pump head upgrade here.
Please ensure that your shipping information is 100% correct before submitting your order.