27L FermZilla Conical Pressure Brewing Kit

*Free BlowTie Integrated 0-15psi Spunding Valve Promotion for our Retail Customers Only*

This particular kit is a one-click option for those who want to be able to brew under pressure with a 27L Conical FermZilla. 

This is a very good starting point for those who are just getting into pressurisable fermenters and want to know what we would recommend to use with them. Pressure fermentation opens up a world of possibilites for the homebrewer wanting to take their beers to the next level. If you are kegging then the ability to do a closed pressure transfer straight into a keg is worth the cost of entry!

We have a great breakdown about the benefits of pressure fermentation here, and a guide to closed transfer here. 

If you don't have any spare disconnects or tubing lying around you might want to grab a Big Jumper transfer line kit.

This kit has carbonation caps on the collection container either to purge or take samples of yeast from.

We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.

Please see the description for dimensions!

This particular kit is a one-click option for those who want to be able to brew under pressure with a 27L Conical Gen2.1 FermZilla. Designed as a single batch system that goes perfectly hand in hand with the BrewZilla 35L Gen 3.1.1 or the BrewZilla Gen4 35L if you are looking to Brew All Grain to Partial Mash beers.

This is a very good starting point for those who are just getting into pressurisable fermenters but also want to dabble in yeast harvesting and purged dry hopping. If you would prefer a more simplistic pressurisable fermenter in a similar size, we would very much recommend the 30L All Rounder FermZilla Pressure Brewing Kit. This unit does not have the added collection container / butterfly valve assembly at the bottom.

We would also still recommend getting a CO2 Gas to be able to transfer to a keg/bottle/can or dispense directly out of the unit. As these units were designed to be fermenting and pressure transfer vessels for your delicious cargo.

For more information on what set ups other brewers have or recommend, jump over to our KegLand Home Brew Community Group Facebook Group.

What we have inside this kit is:
1 x KL06835 27L Conical FermZilla Base Kit (unassembled)
   
2 x KL10788 Red Carbonation Caps (We use these as Gas posts)
2 x KL10788-Yellow Yellow Carbonation Caps (For Liquid Posts)
1 x KL17060 Stainless Steel Float with Silicone Dip Tube and Mesh Filter (You will need to cut this to your desired depth)
1 x KL15042 BlowTie Integrated Spunding Valve Kit
      FREE! 0-15psi Integrated Blow Tie Spunding Valve RRP$39.95!
1 x KL20756 duotight 8mm x Gas Ball Lock Disconnect (Red/Grey)
1 x KL18012 8mm Rigid Joiner Tube


*The above items cannot be removed / altered within this kit*
Collection container lid is not pressure rated*

The FermZilla 27L Gen2.1 is brought to you by the critical key minds and engineers behind the original Gen1. But with all the tweaks that make it the most cost-effective conical uni-tanks in the world.Revolutionise your homebrewing experience with the FermZilla range. Experience the cost benefits over stainless steel with pressurisable fermentation up to 2.4 bar, pressure transfers and dispensing all in the one place. All with the added benefit of viewing the magical fermentation process from start to finish.  

Changes from Gen1:
1. Larger dump valve
2. Larger lid opening than Gen1 tanks
3. Pressure rating 2.4bar (35psi)
4. Designed to fit in the new WiFi ControlledRAPT Fermentation Chambers

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.

Occasionally these units may come with some small indentations/dimples/dents from shipping, this is just a reality of shipping large blow-moulded thin-walled vessels. But don't panic, these fermenters are designed to endure minor deformations such as this. This was a necessary implementation into the design so that they can withstand some accidental suction from cold crashing and rough handling in transit without compromising their integrity and ability to endure high pressures. All small dents will push out and settle with use and positive pressure and are only an issue and warrant replacement in the rare event they start to show white stress patterns or have damaged the plastic.

Instructions:
To download the instruction sheet for this product click on the link below:
FermZilla 27L - PDF Instruction Manual

Dimensions:
To download the sizes for the FermZilla in both the 27L click the link below. Please measure up before purchasing.
FermZilla 27L

Warnings:
Please read the instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.

To see the video on this product look below:

We have also made this video here to show you how to get the Dump Valve Together.  Some people get a bit confused with the reverse left hand thread so we thought we should make a video explaining this.

Are you interested in fitting a glycol heating or cooling coil for temp control then you might want to check out this product.  This coil can fit into the lid of these fermenters and it's a complete kit that includes the duotight bulkhead fittings.  To see the Temp Twister Stainless Coil Click Here.

If you want to fit a thermowell to the lid of this fermenter then you should really check out this 60cm Stainless Thermowel that includes the bulkhead fitting so you can mount this into the lid of this Fermenter.

If you want to see another review on the product you can see this one from PubSheds in the UK:

Here is another video from a product reviewer called David Heath who has a great channel based in Europe:

For some really handy tips and tricks you can see a video from Gash.  He is a total legend:

We sometimes get asked what is the easiest way to clean the dump valve seal on the FermZilla conical unitank and this is definitely the easiest way.  Soak in PBW cleaning solution (for 5 minutes max) then use a high pressure hose to squirt around the seal and this releases any built up hops etc.  See video below.

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy