MKIII Dual Guage Multi Gas Regulator - Type 30

The MKIII Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both psi and kpa.

THIS PRODUCT HAS NOW BEEN SUPERSEDED

This products is now superseded by the MK4 regulator which you can see at this link here.

THIS PRODUCT HAS NOW BEEN SUPERSEDED

This products is now superseded by the MK4 regulator which you can see at this link here.

CO2 and mixed CO2+N2 - MKIII Dual Gauge Multi Gas Regulator
This is the regulator with the Type 30 for Carbon Dioxide and also Carbon Dioxide+Nitrogen mixed gasses.  With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both psi and kpa.  It's also suitable with the CO2 Gas cylinders that we also sell:

2.6kg CO2 Gas Cylinder
6.0kg CO2 Gas Cylinder

The most common problem with regulators sold on the market was that contamination would occur through the seat and cap assembly within the regulator.  This has now been solved with a second sintered filter on the underside of the seat assembly, within the regulator, to block contaminants.

New and improved features.
- Ultra-high molecular weight polyethylene seal (UHMWPE).  The new UHMWPE is far superior in chemical resistance and stability than other big brand names that use Teflon.
- 0 - 50 PSI recommended working pressure (higher pressure guages and RPV can be fitted to make this model go up to 100 PSI)
- 1/4 in MFL outlet (so it uses the same swivel nut and barb as your ball lock disconnects, it is also compatible with this duotight push in fitting)
- Improved seat and seat cap design
- Fully encapsulated seat assembly helps prevent contamination
This regulator can be used for a wide range of gasses but for other gas types a different Nut and Stem Is required.  Out of the box this regulator will be suitable for Carbon Dioxide (CO2 and CO2+Nitrogen Mixed Gasses).  However if you want to purchase this regulator for other gas types you can interchange the nut and stem with either a Type 10 or Type 50 as as shown below:
Type 10 Nut & Stem :  Helium, Argon, Oxygen
Type 50 Nut & Stem : Nitrogen

Shipping prices are calculated on the checkout page based on the size, weight, and where it needs to be delivered. You can be confident that you will receive accurate and fair shipping rates specifically tailored to suit your individual purchase. 

Once an order is placed, please note that KegLand is unable to make changes or additions to the order or modify the shipping information. If any changes are required, it is the customer's responsibility to directly contact the shipping provider and arrange for redirection or any necessary adjustments. 

Read More: Shipping Policy