Replacement BrewZilla 35L & 65L 6w Pump - Magnetic Drive Pump | 6 Watt (Fits RoboBrew 3.0)
It is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!
KL03865 Stainless Steel 25w Pump Head - coming soon.
Replacement BrewZilla 35L & 65L 6w Pump - Magnetic Drive Pump | 6 Watt (Fits RoboBrew 3.0)
This magnetic drive pump is the ideal pump is the same one that we use in the Robobrew 35L and 65L. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient well under 1 amp this pump can be run continuously at elevated temperatures.
The input and output of the pump are 14mm OD so this will allow you to hook up silicon hose (port KL06873) directly to the pump and secure with hose clamp.
This pump is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!
This pump also comes un-wired. So it's ready to install into your own brewery or replace the Robobrew pump if you need to for some reason.
Specifications:
Voltage: 220-240 at 50-60hz
Specifications: Max Head: 2.1m(at 240v)
Specifications: Max Flow: 12L/min )at 240v)
Input and Output size: 14mm OD (to suit hose with ID 11-13mm)
We recommend to not run the pump dry for too long as it may impede future performance.
Delivery Return |
Please ensure that your shipping information is 100% correct before submitting your order. |
---|